Fact sheet

Facts, specifications and sources.

Everything we can state about the coin and the copper, with the source for each. Written to be quoted.

Last reviewed November 20, 2026
Cite this page

Real Liberty Copper, “Real Liberty Copper: Facts, Specifications and Sources”, reallibertycopper.com/pages/facts, last reviewed November 20, 2026.

Real Liberty Copper coins are struck with original 1886 copper components removed from the Statue of Liberty during its federally authorized 1984–1986 restoration. These are the copper saddles and rivets that fastened the Statue’s skin to Gustave Eiffel’s iron armature; the skin itself was never removed. Each coin blends that copper with refined minting copper, carries a unique serial number and comes with a Certificate of Title.

This page states the facts once, with sources, for collectors, journalists and anyone summarizing the program. The full chain of custody is in the provenance record.

At a glance

Record · RLC-FS-01
What it is

A commemorative coin struck with original 1886 copper components removed from the Statue of Liberty during its federally authorized 1984–1986 restoration. Each coin is individually serialized and comes with a Certificate of Title.

Which copper

The copper saddles, brackets and rivets that connected the Statue’s copper skin to Gustave Eiffel’s iron armature. They were shaped at the Gaget, Gauthier & Co. workshop in Paris between 1875 and 1884 and were in place when the Statue was dedicated in 1886. They are interior, structural copper, never visible from the outside.

The skin itself was not removed. It was repaired in place and is still on the Statue.

Composition

More than half of every coin is copper that was inside the Statue of Liberty — the saddles, brackets and rivets that held her together, removed during her official restoration and preserved rather than scrapped. The balance is 99.99% pure copper.

Statue of Liberty copper

9 g of each 16.7 g coin (53.89%). In plain terms, more than half of every coin is copper that was inside the Statue of Liberty.

Balance

7.7 g of 99.99% pure copper.

From bracket to coin

1. Copper saddles, brackets and rivets removed from her interior during the official 1984–1986 restoration. 2. Preserved rather than scrapped, and held in documented custody. 3. Melted into ingots. 4. Smelted to remove lead and other impurities from the original fabrication. 5. Blended with 99.99% pure copper to reach the final alloy. 6. Struck in Rhode Island, numbered, and registered. Refining removes the lead and other contaminants left by 1886 fabrication; it does not change the metal.

Weight and size

16.7 g (0.59 oz), 30 mm, octagonal

Finish

Brilliant Uncirculated

Design

Obverse: Lady Liberty in profile, with “Liberty Enlightening the World” and the years 1776 and 2026. Reverse: “United States of America”, “We the People”, 1776 and 2026, and the coin’s serial number.

Serial numbers

Every coin carries a unique seven-digit serial number. Buyers can take an assigned number or choose one; at the last review, numbers 0001001 to 0130000 were open for selection.

Price

Standard Coin: $250 USD · Choose Serial Number: $312 USD

Free shipping

In the box

The coin, a numbered Certificate of Title and a presentation display box with a copper torch emblem.

Guarantee

7-day money-back guarantee: return the coin in its original condition within 7 days for a full refund.

Struck by

Alchemist Mint, the mint founded by Carolyn Rafaelian, as reported by JCK and WJZ / CBS Baltimore. Made in America.

Steward of the copper

Belcourt of Newport, a 501(c)(3) nonprofit museum in Newport, Rhode Island, is the permanent home of the preserved collection. Belcourt does not sell coins or manage the program.

Give-back

10% of net proceeds are dedicated to the American Liberty Assembly, a nonpartisan gathering that will first convene at Belcourt of Newport in 2027. Coins bought through a charity partner page give 10% to that partner.

Legal status

A collectible historical artifact. Not government-issued currency, not an investment product and not a security. Not issued, licensed or endorsed by the U.S. government, the U.S. Mint or the National Park Service.

Timeline

  1. 1875–1884

    The copper components are shaped at the Gaget, Gauthier & Co. workshop in Paris.

  2. October 28, 1886

    The Statue of Liberty is dedicated in New York Harbor.

  3. 1984–1986

    Federally authorized restoration (closed May 29, 1984, reopened July 5, 1986). The iron armature is replaced with stainless steel, the torch is rebuilt, and the original copper saddles, brackets and rivets are removed.

  4. 1986–2016

    Slated for disposal, the removed metals are preserved and held in custody by Rick Stocks.

  5. 2016

    Alex and Ani releases a Liberty Copper jewelry collection made with restoration copper. Stocks passes stewardship of the collection to Carolyn Rafaelian, and it finds a permanent home at Belcourt of Newport.

  6. 2026

    The copper is struck into individually serialized coins for America’s 250th anniversary. Forbes, the New York Post and JCK cover the launch in May.

  7. 2027

    The first American Liberty Assembly is scheduled to convene at Belcourt of Newport.

Common questions and corrections

Was the Statue of Liberty’s copper skin removed during the 1984–1986 restoration?

No. The skin was repaired in place and is still on the Statue; the Copper Development Association described it as virtually intact after a century of weather. What came out were the components behind it: the copper saddles, brackets and rivets that connected the skin to the iron armature, the armature itself (replaced with stainless steel) and the 1886 torch, which is now in the Statue of Liberty Museum.

Is the coin made entirely of Statue of Liberty copper?

No. More than half of every coin is her copper — about 9 of its 16.7 grams. The copper that came off her was fabricated in 1886 and carried lead and other impurities, so it’s refined and brought up with 99.99% pure copper to make a stable, safe, cleanly struck coin.

Is it copper from the Statue’s original construction or from the 1980s restoration?

Both descriptions refer to the same copper. The components were made in Paris for the Statue’s construction, were in place from 1886, and were removed during the 1984–1986 restoration.

How can I verify a coin?

Each coin carries a unique serial number and ships with a numbered Certificate of Title, and each serial is recorded in the Real Liberty Copper Historical Ledger. The provenance record documents the copper’s chain of custody from the restoration to today. Questions about a specific coin can go to concierge@reallibertycopper.com.

Is this an official U.S. Mint or National Park Service product?

No. It is not issued, licensed or endorsed by the U.S. government or the National Park Service. The U.S. Mint’s 1986 Statue of Liberty commemorative coins are a separate program and contain no restoration copper.

Has restoration material from the Statue been sold before?

Yes. Restoration debris was offered for sale in the 1980s, and in 2016 Alex and Ani released a Liberty Copper jewelry collection made with copper from the restoration (ABC News). Real Liberty Copper coins come from that same preserved collection, now struck as individually serialized coins with a Certificate of Title.

Who is behind Real Liberty Copper?

Real Liberty Copper is a privately stewarded preservation project. Carolyn Rafaelian has held stewardship of the restoration collection since 2016, the collection’s permanent home is Belcourt of Newport, and the coins are struck by Alchemist Mint. Forbes, the New York Post, JCK and CBS Baltimore have covered the program; see the press page.

Press and contact

Press, partnership and collector questions: concierge@reallibertycopper.com. Coverage to date is on the press page.

How to cite this page: Real Liberty Copper, “Real Liberty Copper: Facts, Specifications and Sources”, reallibertycopper.com/pages/facts, last reviewed November 19, 2026.